In this paper the aim is to make a complete ropeway conveyor and unloading system setup for long and non linear transportation of materials using PLC environment. The system is used for the transportation of raw materials from the mines place to the production place. Since it is difficult to transfer it through road, a rope way system is used. The raw materials from the plant is brought through ropeway and given to a vibrator system. From here, through conveyor it goes to the production place. All controls are being taken place in mines.

 

Published In : IJCAT Journal Volume 1, Issue 1

Date of Publication : 28 February 2014

Pages : 01 - 03

Figures : 02

Tables : --

Publication Link : IJCAT-2014/1-1/Ropeway-Conveyor-and-Unloading-System-using-PLC

 

 

 

Ambily Francis : Completed AMIE in Electronics and communication engineering in the year 2007. Completed M-Tech in Applied Electroncs from Karunya university in the year 2010, now working in Jyothi Engineering college as assistant professor Department of AEI.

Muhammad Hassan Anas KT : Final year students of B-Tech in Applied Electronics and instrumentation in Jyothi Engineering college cheruthuruthy, Thrissur

Ratheesh KP : Final year students of B-Tech in Applied Electronics and instrumentation in Jyothi Engineering college cheruthuruthy, Thrissur

Vishnu G Nair : Final year students of B-Tech in Applied Electronics and instrumentation in Jyothi Engineering college cheruthuruthy, Thrissur

 

 

 

 

 

 

 

Bicab Ropeway

Saysaw sensor

Proximity sensors

Load cell

Areal Ropeway

Ropeway is a modest simple and efficient method for long and nonlinear transportation and it can be simply implemented using PLC environment. PLC environment is 100% efficient comparing with old relay based system.

 

 

 

 

 

 

 

 

 

[1] Beha, R.:Bewegungsverhalten und Kraftwirkungen des Zugseiles und derFahrzeuge von Zweiseilbahnen zur Berechnung der Dynamik desGesamtsystems.

[2] Technical Recommendations, Studies and Statistics for Aerial Ropeways.International Organisation for ransportation by Rope.

[3] Težak, S., Mavrin, I., Juric, I.: Influence of modern opeways on the development of mountain tourist centres, Promet – Traffic – Traffico, Vol. 17, No. 5, 2005, pp. 245- 251.

[4] Sever, D.: Some New Methods to Assure armonisation of Sustainable Development of Mountain Resorts Ropeway, PrometTraffic-Traffico, Vol. 14, No. 5, 2002, pp. 213-220.

[5] Kovacs, G.: Schwingungsverhalten eines endelbahnfahrzeuges bei einseitigem Zugseilriss und anschliessender Tragseilbremsung. Dissertation ETH Zuerich, Institut fuer Leichtbau und Seilbahntechnik, 1994.

[6] Richter, T.: Schwingungsverhalten von Einseil- Umlaufbahnen beim Anfahren und Bremsen Dissertation, ETH Zuerich, Institut fuer Leichtbau und Seilbahntechnik, 1989.

[7] Winkler, G.: Rechenmodell zur Simulation der Statik und Dynamik von Tragseilen bei Grosskabinen-Seilschwebebahnen. Dissertation TU Muenchen, Lehrstuhl fuer Foerderwesen, 1993.