The objective of this work is to use data logging
for temperature measurement. In order to meet the above
requirements, a low cost, versatile, portable data logger is
designed for green house. A microcontroller based
temperature data logger has been developed for measuring
temperature, humidity, moisture and at different input
channels of ADC. The device is designed to receive data
from temperature humidity, moisture and light sensors and
to store the results on only memory in PC for post process
analysis. An integrated Liquid crystal display (LCD) is also
used for real time display of data acquired from various
sensors.
Ms. Apurva Ganar : Educational Qualification is M.Tech.
(Communication Engg.) and presently working as
Asst.Professor,Electronics Engineering, Rajiv Gandhi College of
Engg., & Research, Nagpur. Interesting subject areas are Embedded
and Digital Image Processing.
Ms. Rachana Borghate : Educational Qualification is M.Tech.
(Electronics Engg.) and presently working as
Asst.Professor,Electronics Engineering, Rajiv Gandhi College of
Engg., & Research, Nagpur. Interesting subject areas are Embedded
and Neural Networks and Fuzzy logic.
Ms. Kumudini Borkute : Educational Qualification is M.Tech. (VLSI)
and presently working as Asst.Professor,Electronics Engineering,
Rajiv Gandhi College of Engg., & Research, Nagpur. . Interesting
subject areas are Embedded and Digital Image Processing.
Mr. Nilesh Chide : Educational Qualification is M.Tech. (Electronics
Engg.) and presently working as Asst.Professor,Electronics
Engineering, Rajiv Gandhi College of Engg., & Research, Nagpur.
Interesting subject areas are VLSI and Embedded.
Mr. Pratik P. Bheley : Educational Qualification is M.Tech. (VLSI)
and presently working as Asst.Professor,Electronics Engineering,
Rajiv Gandhi College of Engg., & Research, Nagpur. Interesting
subject areas are VLSI and Network Security.
Data Logger, ATMEGA 8A Microcontroller,
ADC, LCD.
The data acquisition system is use to collect and analyse
experimental data, having the ability to clearly present
real time results. Using sensors and probes the system
able to responds the parameters which are beyond the
normal range available from most traditional equipment.
The system is used for measuring the temperature,
humidity and detection of carbon monoxide. We have
design a weather data acquisition system, which is of less
cost, portable, and consumes low power. It is an efficient
system, which works in real time mode and measures the
parameter like temperature, humidity and detects the
presence of carbon monoxide gas. These data can be seen
on monitor using Terminal software.
[1] Hongmin Wang ; Harbin University of Science and
Technology, China ; Zhu jie ; Xufei Nie ; Dandan Li;
“Design of PIC microcontroller-based high-capacity
multi-channel data acquisition module”, 2012
International Conference on (Volume:2 ); 18-20 May
2012; page no. 685 – 688.
[2] Anindita Bora, Kanak Chandra Sarma; “Design of a
USB based Multichannel, Low Cost Data Acquisition
System using PIC Microcontroller”; International
Journal of Computer Applications (0975–
8887),Volume 59–No.6, December 2012.
[3] Swati J. Modi, Kunal B. Bhoyania, “Design And
Development Of Multi-Channel Usb Data Acquisition
System For Parameters Measurement” Journal Of
Information, Knowledge And Research In Electronics
And Communication, ISSN: 0975 – 6779| NOV 12 TO
OCT 13 VOLUME – 02, ISSUE - 02| Page 861.
[4] Izzat Din Abdul Aziz, Mohd Hilmi Hasan, Mohd
Jimmy Ismail, Mazlina Mehat and Nazleeni Samiha
Haroon, “Remote monitoring in agricultural
greenhouse using wireless sensor and short message
service (SMS),” Int. J. Engg. Techlon., vol. 9, no. 9,
pp. 35- 43, 2009.
[5] Akshay C., Nitin Karnewal, Abhfeeth K.A. Rohan
Khandelwal, Tapas Govindraju, Ezhilarasi D., Sujan
Y, “Wireless sensing and control for precision green
house management,” in Proc. Sixth Int. Conf. Sensing
Techlon, (ICST), 2012, pp. 52-56.
[6] Nirlipta Ranjan Mohanty, C. Y. Patil, “Wireless
sensor network design for greenhouse automation,”
Int. J. Engg. Innovative Technol., vol. 3, iss. 2, pp.
257-262, Aug. 2012.
[7] Devendra Samrit, Mayur Parate, Nitin Gawai,
“Development of data acquuistion and greenhouse
control system,” Int. J. Engg. Res. Technol., vol.2, iss.
4, pp. 899-903, Apr. 2013.
[8] Kratika Sharma, Hemendra Shrimali, Jaideep Sing
Hada, Abhishek Chattri, “Data acquisition and
supervisory control system for environmental
parameters in green house,” Int. J. Engg. Trends
Technol., vol. 3, iss. 5, pp. 595-600, 2012.
[9] R. Jaichandran, A. Anthony Irudhayarj, “Prototype
system for monitoring and computing greenhouse
gases,” World Comput. Sci. Inf. Technol., vol. 1, no. 5,
pp. 177-183, 2011.
[10] Mukesh Kumar, Sanjeev Sharma and Mansav Joshi,
“Design of real time data acquisition with multi node
embedded systems,” Int. J. Comp. Appl., vol. 42, no.
11, pp. 6-12, Mar. 2012.
[11] Kiran Sahu and Sushmita Ghosh Mazumdar,
“Digitally greenhouse monitoring and controlling of
system based on embedded system,” Int. J. Sci. Engg.
Res., vol. 3, iss. 1, pp. 1-4, Jan. 2012.
[12] Subhransu Padhee, Yaduvir Singh, “Data logging and
supervisory control of process using LabVIEW,” in
Proc. IEEE Students Technol. Symp. Conf., 2011, pp.
329-334.
