Sign language is a language through which
communication is possible without the means of acoustic
sounds. The objective of Sign Language Conversion System is
improving developed uses a glove fitted with sensors that can
interpret the 26 English letters in American Sign Language
(ASL). The glove uses flex sensors, contact sensors, and
accelerometers in three dimensions to gather data on each
finger’s position and the hand’s motion to differentiate the
letters. The translation is transmitted to the base station, which
displays as well as pronounces the letter. The scope of the
proposed solution is to improve acts as a very good medium
between normal people and deaf people, by using ASL sign
language we can form all sentences and Cost effective because
of implementing on single hand.
Published In : IJCAT Journal Volume 1, Issue 4
Date of Publication : 31 May 2014
Pages : 131 - 136
Figures : 07
Tables : 02
Publication Link : Manual Communication using Sign Language
Conversion System
Vijay Kumar M A : Asst. Professor, Department of ECE, PESITM
Shimoga-577204, Karnataka, India
Nikhil R : UG Students, Department of ECE, PESITM
Shimoga-577204, Karnataka, India
Sunil Kumara K M : UG Students, Department of ECE, PESITM
Shimoga-577204, Karnataka, India
Pradeepa D : UG Students, Department of ECE, PESITM
Shimoga-577204, Karnataka, India
American Sign Language
flex sensors
Microcontroller PIC 16F887
This tool acts as a very good medium between normal
people and deaf people.By using ASL sign language
we can form all sentences.Cost effective because of
implementing on single hand. It is easy to remember
all the alphabets. Compared to other technologies we
achieve 90% efficiency.
[1] Frenando M “Low cost approach for real time sign
language recognition” Industrial and Information
Systems (ICIIS), 2013 8th IEEE International
Conference on Date of Conference:17-20 Dec. 2013
Page(s):637-642.
[2] Zhang Xiaomei “Research on Chinese-American Sign
Language Translation”, 2011 IEEE 14th International
Conference on 24-26 Aug. 2011 Page(s):555 – 558.
[3] Lele, M.A “Evaluation of solid state accelerometer
sensor for effective position estimation”,21-25 June
2011 Page(s): 959 – 964.
[4] Chenghui Yang “Application and design of
automation communication devices-A novel design of
digital doorbell”, 2011 IEEE 3rd International
Conference on 27-29 May 2011 Page(s): 390 – 393.
[5] GuoxinLuo “Wireless transmission of RS232
interface signal based on ZigBee”, 2010 International
Conference on 18-20 July 2010 Page(s): 239 – 241.
[6] Ziqiang Gong “Application of Visual C # in
experimental data processing”, 2011 International
Conference on 27-29 June 2011 Page(s): 1134 – 1137